Probably you can't - these switching input and power features are part of HDMI-CEC which you have to have on for ARC to work. Aquos Link is Sharps name for HDMI-CEC. see if you can switch off different features of Aquos Link and/or CEC on the soundbar (whilst keeping the overall CEC setting as "on". My opinions expressed here do not For a hard reset: Unplug your TV. Press and hold the "Channel Down" and input" buttons on the panel. Plug the TV back while holding down these buttons. Seek assistance for this step if you have to. Keep holding the buttons until the TV powers back on. If it doesn't work, unplug the TV and try again. 1. Switch on your TV by pressing the Power button on the bottom left side of your Sharp TV. 2. Press the Input button on its physical buttons port. It will change the Input mode from Cable mode. 3. If your TV is already in the Input mode, you need not press the Input button. 4. If your Sharp TV fails to recognize an input, you may have to adjust the cables, cords or TV settings. DVD and VCR players, PCs, home theater receivers and other electronic devices all need to be tweaked a little bit differently in order for your TV to recognize them. Restart your Sharp TV and check if the sound is working. Swapping Your HDMI Inputs. If you are using an HDMI cable to connect your device to your Sharp TV, you might need to swap your HDMI inputs. Certain HDMI inputs on your TV might not function correctly with sound, especially those labeled as HDMI ARC or HDMI CEC. Swapping your HDMI inputs Dịch Vụ Hỗ Trợ Vay Tiền Nhanh 1s.

sharp tv av input not working